Product ID:BOTTOMKOTE, 779
MSDS Date:03/08/1988
FSC:8010
NIIN:00N020169
MSDS Number: BLLJJ

INTERNATIONAL PAINT

HOUSTON, TX 77292-0762
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 0-1%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 15-20%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 0-1%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (I) OXIDE;(CUPROUS OXIDE)

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 45-50%

OSHA PEL 1 MG(CU)/M3 DUST

ACGIH TLV: 1 MG(CU)/M3 DUST

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 0-1%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:SEVERE IRRITATION, REDNESS,
TEARING AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. HARMFUL IF ABSROBED THROUGH SKIN. INHALATION:SEVERE
IRRITATION, DIZZINESS, POSSIBLE NAUSEA AND VO MITING AND
UNCONSCIOUSNESS. INGEST:GASTROINTESTINAL IRRIT, NAUSEA, VOM,
DIARRHEA & UNCONSCIOUSNESS. (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HEALTH HAZ:CHRONIC: CHRONIC OVEREXPOSURE TO,
AND MISUSE OF SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYE:FLUSH IMMED W/COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
MIN. GET MD ATTEN IMMED. SKIN:REMOVE CONTAMINATED CLOTHING, WASH
SKIN WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES BEFORE REUSE.
INHAL:R EMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPRIATION IF NEEDED.
GET MEDICAL ATTENTION. INGEST:GET MEDICAL ATTENTION IMMEDIATELY.
DRINK PROMPTLY MILK, EGG WHITE, GELATIN SOLUTION OR WATER. AVOID
ALCOHOL.

Flash Point:83.0F,28.3C
Lower Limits:1%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA.
H2O MAY BE USED TO COOL UNOPENED CNTNRS, BUT MUST NOT BE USED AS
EXTING MEDIA. TAKE CARE TO PREV SPREAD (SUP DAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH
ABSORBANT MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STOR OF LIQ W/NFPA CLASS I C. AVOID BRTHG DUST OR CHIPS FROM
SANDING (SUP DAT)
Other Precautions:THIS MATERIAL IS TOXIC TO FISH IF MISUSED, READ
CONTAINER LABEL BEFORE USE.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATN IN RESTRICED VENT AREAS, USE
NIOSH/MSHA APPRVED RE SP IN ACCRD W/29 CFR 1910.134 (SUP DAT)
Ventilation:PROVIDE SUFFICIENT VENT IN VOLUME & PATTERN, TO KEEP
TLV/LEL OF HAZ ING BELOW LIMITS & TO REMOVE DECOMP PROD (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROD:OF BURNING LIQUID WITH WATER. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT. HNDLG & STOR PREC:OR BLASTING
SURF COATED WITH THIS PRODUCT. RESP PROT:TO REMOVE COMBINATION O F
PARTICULATES AND VAP. VENT:DURING WELDING/FLAME CUTTING ON SURFACES
COATED WITH THIS PRODUCT.

HCC:F4
Boiling Pt:B.P. Text:280F,138C
Vapor Pres:SEE INGS
Vapor Density:>1
Spec Gravity:1.773
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:26

Stability Indicator/Materials to Avoid:YES
MOISTURE, OXIDIZING AGENTS
Stability Condition to Avoid:KEEP DRY. STORE AWAY FORM DIRECT HEAT,
FLAME OR SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, COPPER FUMES

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.